Product Search
Search results for 'C-1621'
Showing 21 - 41 of 563 Total Results
Cylinder Platen, 6 ½” Diameter
(3) options
Location: Test Platens
Free floating bearing platen seats under test pressure. . Used when testing 6” (152 mm) or 4” (101 mm) diameter concrete cylinders in compression. Platen is manufactured from steel with all components plated for corrosion resistance. Upper cylinder platen used when testing 6” (152 mm) or 4” (101...
Dynamic Cone Penetrometer only
SA-1225
Location: Dynamic Cone Penetrometer
The Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20" and can be used effectively in augured holes to depths of 15 to 20 feet. The DCP features a heat treated cone and zinc plated components.
Modified Vicat for Consistency and Set Time
CA-3115
Location: Vicat Apparatus
The Modified Vicat Apparatus from Test Mark Industries tests hydraulic cement mortars.
(8) options
Location: Manual Compression Testing Machines
Testing range of 3,000 to 300,000 lbs. (13.3 – 1,334 kN) with an accuracy of ±.5% of indicated load., Load frame stiffness of 10.5 million lbs/in, stronger than any competitive machine in its class., Choose a basic budget-minded digital or an advanced indicator that automatically calculates and...
iD-Indicator
Location: Digital Load Indicating Systems
Dual operating language option – display all test setup menu programs in either English or Spanish., Automatically calculates and displays peak stress at the end of a test. . Digital display in English Digital display in Spanish The iD indicator is the system of choice for testing programs where...
CA-0500
Location: Air Entrainment/Pressure Meter
The air entrainment concrete pressure meter from Test Mark is part of a complete line of concrete testing equipment, available for easy online ordering.
(8) options
Location: Manual Compression Testing Machines
Testing range of 2,500 to 250,000 lbs. (11 – 1,112 kN) with an accuracy of ±.5% of indicated load., Supplied with platen set for testing 6" x 12" (150 x 300 mm) cylinders using unbonded or sulfur capping method and steel safety guard doors., Continuous duty hydraulic pump runs quieter, cooler and...
AA-1000
Location: Reflux Extractor
The 1000g Reflux Extractor Set from Test Mark is used to determine the percentage of bitumen in a paving mixture using hot solvent extraction.
CA-0360-P
Location: Slump Testing
Test Mark's plastic slump cones for concrete testing are more economical than metal cones and will not rust or dent.
SA-0200
Location: Sand Density
The Sand Cone Density Apparatus from Test Mark Industries determines the in-place density of soils.
Dynamic Cone Penetrometer with Auger
SA-1200
Location: Dynamic Cone Penetrometer
Test Mark's Dynamic Cone Penetrometer (DCP) uses a 15 lb. steel mass that falls 20 inches and can be used effectively in augered holes to depths of 15 to 20 feet.
SA-0109-L
Location: CBR Accessories
LBR mold. 6" ID x 6" H with 2" detachable collar. Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. LBR requires Spacer Disc, sold separately.
CA-0370
Location: Slump Testing
This cast-aluminum base provides a sturdy, level surface on which to perform slump tests. Cleats dig into the ground for firm, level support.
Constant/Falling Head Permeameter Set
(5) options
Location: Constant/Falling Head Permeameter Set
Constant/Falling Head Permeameter Set for use with granular soils in determining the coefficient of permeability via the constant or falling-head method for laminar flow of water.
CA-3150
Location: Gillmore Apparatus
The Gillmore Apparatus is used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime and certain mortars.
TS17 Touchscreen Load Indicating System
TS17
Location: Digital Load Indicating Systems
Test Mark is proud to introduce the TS17 touchscreen digital load indicating system for concrete compression testing machines. The controller’s 7'' full color waterproof screen uses large, easy-to-read, alphanumeric characters to simultaneously display live load, sample stress, and rate of loading...
SA-0210
Location: Sand Density
The Density Plate provides a flat, stable base for the sand cone apparatus - available from Test Mark Industries.
(2) options
Location: Test Platens
One fixture tests both 4” and 6” beams. . Used to determine the modulus of rupture for both Center and Third Point beams with depths of either 4” or 6”. The upper heads load bearing blocks are easily changed for center or third point test configuration for either size beam. Bottom support blocks...
(4) options
Location: Tamping Rods
Tamping rods from Test Mark eliminate air voids in concrete when making slump tests, concrete cylinders or conducting concrete air entrainment test.
CA-0364
Location: Slump Testing
K-Slump Tester for in-place measurements indicates correlation to the slump test. The probe determines workability of concrete and the degree of compaction.